Skip to main content

How to connect the Gotv decoder to two televisions

Do you have a Gotv decoder and wish to connect it to two televisions, you can do it yourself with these quick and easy steps below:
You need an F connector cable,to get through this action

Make sure your Gotv is switch on,before further movement. On one end of the F connector cable; unwrap the F connector cable,you will see a silver pin in between. Connect it to the back of the decoder, the part labelled RF out.
 
Bliznaija 
                                     
RF Out Connector
 Note: don't confuse the RF in to RF out.
RF In, is for only one television connected to the decoder and also the antenna.


RF out is meant for more than one television and also it's for far distance connection.
After connecting the first cable,you move on to the next cable and the second television, connect the F connector to the back of the television, that is normally used for connecting antenna.

Now you are almost done,change the channel one after the other till you see the Gotv channels.

Now you're done.

Comments

  1. Deri28 February 2019 at 15:23

    Good information boss. I was able to connect ma decoder to two TVs thanks to u. Bless

    ReplyDelete
    Replies
    1. Deri28 February 2019 at 15:28

      ......but no sound hat shld I do pls

      Delete
    2. Adibe Joy17 August 2019 at 04:07

      Sorry for not responding to you for months
      I will get back to you soon

      Delete
    3. Adibe Joy17 August 2019 at 04:09

      Please pardon me for not responding for months
      My blog was under some construction, but I hope you have settled the issue

      Delete
    4. NZ14 December 2019 at 00:07

      I the same thing but there is no sound.... What I do?

      Delete
  2. Jay22 October 2019 at 07:35

    Please I like your work it's great. But I would need help with sound issue.

    ReplyDelete
  3. Unknown5 August 2020 at 02:41

    Thank u very much.. This really helped me. But am having sound issue. Wat do I do?

    ReplyDelete
  4. Unknown10 October 2020 at 05:31

    I did same but there is no sound. What should I do pls?

    ReplyDelete
  5. Anonymous10 May 2023 at 12:04

    When you connect the Rf out to another television at the antenna spot, what's next do you search the channels from the external television to give view?

    ReplyDelete

Post a Comment